Edge protectors

Our standard angular edge protectors are suitable for all retail packaging and for all transported goods. It offers effective protection against damage in transit while being easy to use at the same time.

With our standard angular edge protectors, you not only secure stacked boxes on pallets against sideways slipping and protect fragile box corners against damage, you also ensure an optimum distribution of the tension forces across the entire packaging unit by using straps and stretch films. In addition, you can have confidence in our angular edge protectors: At Halaspack, we offer you an above-average product in terms of strength with our angular edge protectors.

Available dimensions:

• Side lengths:
  35 x 35 mm, 40 x 40 mm, 45 x 45 mm, 50 x 50 mm, 55 x 55 mm,
  60 x 60 mm, 70 x 70 mm, 75 x 75 mm, 80 x 80 mm, 100 x 100 mm
• Lengths: 50 to maximum 6,500 mm
• Wall thickness: 2 to 7 mm

Your benefits:

• Optimal securing of the loading units
• Balanced distribution of the tension forces across the entire packaging unit
• Suitable dimensions for your requirements upon request

Would you like angular edge protectors with the same strength but reduced wall thickness and less material? Would you like angular edge protectors with increased strength but the same wall thickness? You are in the right place for both of these. Based on selected raw materials, we create particularly stable angular edge protectors for you. Measured according to the three-point bending strength test of DIN standard, our angular edge protectors achieve up to double the strength of the standard versions, depending on the quality.

Your benefits:

• Less weight
• Less storage space
• Lower costs

We love challenges. The automatic feeding of angular edge protectors into a packaging system is one of them. For a seamless procedure, together with you we have developed machine-grade angular edge protectors. The secret of our success: A high level of dimensional stability. In a special production process, we adjust the geometry and tolerances of the angular edge protectors individually and reliably to the specific requirements of the packaging system. The best advantage: For refill systems, our angular edge protectors can even be fed fully automatically into the strapping machines and positioned accurately.

Apart from the smallest tolerances and clean cutting edges, we guarantee you:

• Angular accuracy of 90° with a maximum deviation of +/-2°
• Corner radius of maximum 2 mm

Available dimensions:

• 45 x 45 x 4 x 100 mm (magazine)
  45 x 45 x 3 x 1,600 mm (positioning system)

Your benefits:

• High level of dimensional accuracy
• Most narrow tolerances
• Clean cutting edges